TITLE 32 SURFACE MAINTENANCE MECHANIC SUPERVISOR (MI SMO - FMS 2)

Summary

THIS IS AN ARMY NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a TITLE 32 SURFACE MAINTENANCE MECHANIC SUPERVISOR (MI SMO - FMS 2), Position Description Number NGD1290000 and is part of the MI FMS 2, Michigan Army National Guard. MICHIGAN ARMY NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a Michigan Army National Guard recruiter prior to applying for this position.

Duties

***THIS IS A TITLE 32 NATIONAL GUARD POSITION THAT REQUIRES MILITARY MEMBERSHIP*** This position is located in the Joint Forces Headquarters-State, Logistics Directorate (J-4), Surface Maintenance Facility. The purpose of this position is to supervise workers directly or through subordinate leaders and/or supervisors in accomplishing work of the function. Plans work operations of great scope, complexity, and administrative authority. Determines the sequence, priority, and time for performance of operations within the limits of broad work schedules and time limits. The occupation and non-supervisory grade level which best reflects the nature of the overall work operations supervised is Surface Maintenance Mechanic, WG-5801-10. Planning: Plans use of subordinate workers, equipment, facilities, and materials on a week-to-week or month-to-month basis. Establishes deadlines, priorities, and work sequences, and plans work assignments based on general work schedules, methods, and policies set by the supervisor. Work Direction: Assigns tasks to be performed based on readiness and explains work requirements, methods, and procedures. Investigates work related problems such as excessive costs or low productivity and determines causes. Administration: Plans and establishes overall leave schedules. Determines training needs of subordinates and arranges for accomplishment. Sets performance standards, and makes formal appraisals of subordinate work performance. Develops, publishes, and ensures employee compliance with standing operating procedures for the activity supervised. Implements and complies with agency, state, and federal regulatory Occupational Safety and Health, and environmental requirements. Performs non-supervisory work, such as, transporting equipment, performing maintenance tasks, etc. Prepares for and participates in various types of readiness evaluations, inspections, mobilization and command support exercises. May be required to perform such additional duties as structural fire fighting, aircraft fire/crash/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operation, maintenance of facilities and equipment, or to serve as a team member on boards to cope with natural disasters or civil emergencies. The above duty description doesn't contain all details of the official position description.

Qualifications

Qualifications are based on breadth/level of experience. In addition to describing duties performed, applicants must provide the dates of each period of employment (from MM/YYYY to MM/YYYY) and the number of hours worked per week. As qualification determinations cannot be made when resumes do not include the required information, failure to provide this information may result in disqualification. Applicants are encouraged to use the USAJOBS Resume Builder to develop their federal resume. For additional information see: What to include in your resume. NOTE: All job seekers will be required to limit their resumes to 2 pages in length when applying for job opportunity announcements (JOAs) MILITARY GRADE: E1-CW4 Selectee(s) must be within the military grade(s) listed in this job announcement prior to the effective date of placement into the technician position to ensure to avoid grade inversion, as determined by the Human Resources Office (HRO). Technicians will not be militarily senior to their full-time supervisor or wage leader (Grade Inversion). Enlisted members currently at a higher grade than allowed by the position (see Military Grade Requirement above) may apply; however, they must administratively reduce prior to appointment and provide confirmation of the reduction to HRO. GENERAL EXPERIENCE: Experience or training which demonstrates knowledge of equipment to be able to do routine jobs, simple preventative maintenance tasks, and can use common tools and equipment in the line of work. SPECIALIZED EXPERIENCE: Experience or training leading to an extensive knowledge of the mechanical makeup, operation, and working relationships of complex interconnecting systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Ability to diagnose, repair, overhaul, and modify interconnected complex systems on a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Extensive knowledge of state of the art electrical, electronic, complex hydraulic, pneumatic, and other major non-mechanical systems that have a functional relationship and effect on the operation of major mechanical systems. Extensive knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls. Skill and knowledge to develop or improvise methods, alter parts, and make repairs in the absence of technical guidelines (such as modifying parts to fit and mesh into systems for which the parts were not designed); improvise modifications to equipment to correct recurring malfunctions; and design modifications to meet special test requirements or other special needs. WS (All Grade Levels) - In addition to the journeyman level knowledge, 36 months experience which demonstrates the ability to plan, direct, and organize work assignments for lower grade personnel. Experience which required the review of work requirements and establish priorities to meet deadlines. Experience that provided knowledge of various lines of work performed by this function. Experience which demonstrates the ability to supervise or the potential to perform such duties as evidenced by the ability to communicate knowledge of general supervisory concepts, and knowledge of shop processes. Experience in adapting existing equipment and techniques to new situations. QUALITY OF EXPERIENCE: Length of time is not of itself qualifying. Candidates' experience should be evaluated on the basis of duties performed rather than strictly on the rank of the individual; however, established compatibility criteria/assignments must be followed. The applicant's record of experience, training, and education must show possession of the knowledge, skills, and abilities needed to fully perform the duties of the position to be filled.

Evaluations

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. You may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration. WHO MY APPLY: AREA 1: Current permanent (Tenure 1 and 2) Federal Technicians/Employees of the Michigan National Guard and current temporary (Tenure 3 and 0) Federal Technicians/Employees of the Michigan National Guard who've held a temporary appointment with the Michigan National Guard for an accumulative 6 months within the last 12 months. IN DESCRIBING YOUR EXPERIENCE, PLEASE BE CLEAR AND SPECIFIC. WE WILL NOT MAKE ASSUMPTIONS REGARDING YOUR EXPERIENCE. Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position. Your rating will be based on both your entire application package as well as the responses to the assessment questionnaire. Please follow all instructions carefully. Errors or omissions may affect your eligibility. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid work on the same basis as for paid experience. Part-time experience will be credited on the basis of time actually spent in appropriate activities. To receive credit for such experience you must indicate clearly the nature of the duties and responsibilities in each position held and the number of hours per week spent in such employment. Your qualifications will be evaluated on the above general and specialized experience, to include following competencies- knowledge, skills, abilities (KSAs): -Ability to Supervise Through Subordinate Supervisors -Knowledge of Specific Equipment, Machinery, Structure, or Components That Are Involved -Reliability and Dependability

How to apply To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/13019461 A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Other information SELECTIVE SERVICE: If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx). MILITARY MEMBERS WITH BONUSES:Upon acceptance of a military technician position military members who are currently receiving a military Reenlistment/Extension Bonus (REB) or GI Bill-SR Kicker may lose incentive eligibility and may be subject to termination or suspension of incentive (includes indefinite and temporary technicians on assignment for more than 180 days in any continuous 12-month period). Are advised to meet with education specialist to review contract. NOTE: If the individual selected is currently on a Title 10 or Title 32 tour no action can be taken until he/she is released from tour.